|
       
A gas boiler should
be serviced annually to keep it working efficiently and safely.
What is involved?
How long will
it take? Who can do it?
Within the boiler the heat from combustion is transferred
to water which in turn is used for a central heating system and
hot water. Manufacturers usually recommend boilers are serviced
annually. What does this mean for the home owner?
A boiler service should
only be carried out by a qualified and registered heating engineer
who will:
- check that the heating system is correctly installed
inline with regulations,
- check that it is working safely and
- check it is working correctly and efficiently
according to the manufacturers' instructions.
The engineer is checking and testing to a well defined
set of criteria, standards and regulations. There is a guide to
the service procedure in the manual which accompanies the boiler
and should be retained by the homeowner from when the boiler was
installed.
The boiler must be working for it to be
serviced.
A boiler service is not:
- repairing a faulty appliance, this is a different
job altogether,
- a homeowner's or landlord's gas safety check,
although checking safety is a part of it.
What Does Maintenance of a Gas
Boiler Involve?
Different types of boiler will
require different work, at the very least the engineer should:
- check the condition of the boiler;
- test for leaks;
- test the gas pressure;
- check valves and pump;
- check the appliance is working correctly;
- ensure it is not producing carbon monoxide;
- check that there is adequate ventilation
- and make sure that the flue is clear and safe.
They will also check the position of the boiler.
Things that have happened around the heating system since the previous
inspection may have an impact on the safety of the system, such
as anything which blocks the flue or ventilation.
An old style cast iron boiler with open flue will involve lots of
dismantling and cleaning which is not required for modern boilers.
A modern boiler may require more of a system performance test rather
than a full clean.
How Long Will a Boiler
Service Take?
The engineer could take from as little as thirty
minutes to well over an hour, this will depend on the work involved,
the type and condition of the boiler. It is not the same thing as
a Homeowner or Landlord Gas Safety Record as defined by law in the
U.K. which requires the completion of form CP12.
How Much Should a Boiler Service Cost?
Obviously the price will vary because of the different work involved.
You are paying for an expert who has trained and undertakes regular
training; who is qualified; who holds insurance; and who pays for
annual registration with the professional licensing body. This is
a very competitive industry; therefore, many gas engineers will
offer you a good deal for your annual service in the hope that they
will also win the more lucrative work of undertaking your boiler
repairs and eventually replacing your boiler.
Here at Andrew
Dodsworth Plumbing & Heating we can service most domestic gas
central heating boilers, with our fully trained gas heating engineers
with a vast knowledge of heating systems .
Our Heating
Engineers are suitably qualified and registered with The Gas Safe
Register.
When do I
Need a Gas Boiler Service?
The boiler manufacturer will probably recommend it
be serviced every year.
The details of frequency of servicing and what is involved will
be detailed in the user manual. The manufacturer can be contacted
for any queries and will give advice freely by phone, email and
via their website.
In the UK the boiler service is a well defined procedure which can
only be carried out by a qualified gas heating engineer.
|